Packed with advanced technology, BeoLab 7 is, quite simply, the most powerful stereo speaker ever developed for TV. With six individual driver units, all powered by their own digital ICEpower amplifier, BeoLab 7 delivers an unequalled sound performance for your TV viewing. The beam-shaped loudspeaker below the screen provides superb acoustic performance and signifies the presence of sound as an integral part of your viewing experience. Musically, the speaker rivals many hi-fi systems, and is quite capable of being used as a BeoLink speaker. The natural fit BeoLab 7 is specially developed for BeoVision 7 to contribute the ultimate stereo sound performance to the viewing experience. BeoLab 7-1 is the natural accompaniment for the BeoVision 7-32 LCD television, while the broader beam of BeoLab 7-2 is designed for BeoVision 7-40. In addition, BeoLab 7 stereo loudspeakers fit naturally under the BeoVision 4 plasma screen, or under a projection screen. In this application, the speaker can be either wall-mounted or placed on a special tabletop stand. Colors to match Long and lean, BeoLab 7-1 and BeoLab 7-2 look at home under a BeoVision 7 or BeoVision 4, or as part of a projection screen setup. The shorter BeoLab 7-1 is best suited for the BeoVision 7-32” screen. The loudspeaker cabinet is made from a single piece of aluminium and coated in a resilient black soft-touch lacquer. The perforated aluminium front grill now comes anodized in five different colors: Light and dark grey, blue, red and black. A firm grip on powerful sound A special three-way bass reflex construction incorporates six individual units – two each for treble, mid-range and bass. Each driver is powered by a unique built-in ICEpower amplifier, delivering a combined effect of 750 watt. In addition, BeoLab 7-1 and 7-2 are equipped with thermal protection circuits and Adaptive Bass Linearisation (ABL), which ensures maximum performance without distortion, even at very high volume. Bang & Olufsen has a quarter of a century of experience making loudspeaker cabinets from extruded aluminium. This technique allows for very rigid and compact enclosures with powerful sound performance. Note that BeoLab 7-1 was designed to be used with the BV4-37 and BV4-42. The wider BeoLab 7-2 may be used with the larger-version BeoVision 4: BV4-50 and BV4-65. Mounting Options All four versions of BeoLab 7 were designed for incorporation with Bang & Olufsen's motor stand options. Specifications: Cabinet finish Aluminium cabinet coated with hard wiring black soft-touch lacquer. Speaker grille in natural colored anodized aluminium Power consumption IEC65: 36 watt Typical: 20 W Stand-by: 0.2 W Power amplifiers (per channel) 3 x 125 watts, Class D, ICEpowerÒ Long-term maximum output power per amplifier Bass: 120 watts/8 ohm Midrange: 120 watts/8 ohm Treble: 120 watts/8ohm Effective Frequency range 37 - 20.000 Hz Crossover frequencies 250 Hz and 4.000 Hz Cabinet principle Bass: Bass reflex Midrange/Treble: Closed box Net volume, bass 4.2 litres (per side) Net volume, midrange 0.8 litres (per side) Magnetically shielded No Woofer 101,6 mm Midrange 76,2 mm Tweeter 19 mm Input sensitivity (Power Link) 88dB @ 125 mV SPL Indicator (for service use only) 1 tri-color LED. Green for On, Red for Off, Orange for Protection mode Operation Free or Wall position Protection Thermal protection Connections: Power Link 1 (Semi-Balanced PL cable type MK III, or fully mounted PL cable required) Mains 1 input, 1 output (not US version)
Please contact the store to buy this product or to make further enquiries about it.